Excal Big softy euro converter teat in a wyedale feeder?

[white_stuffed]

I bought one of these to try, it fits fine but the tests seem very short, half the length of the proper wyedale teats. Does anyone else use them, what do you think of them?
www.kiwikit.co.uk/product/excel-euro-softy-teat-with-elbow/

 

[Agrispeed]

I bought one of these to try, it fits fine but the tests seem very short, half the length of the proper wyedale teats. Does anyone else use them, what do you think of them?
www.kiwikit.co.uk/product/excel-euro-softy-teat-with-elbow/

I looked at those, but if you cut the back of a peach teat you can fit them in the nut

Any of the options are better than the wydale teats IMO

 

[white_stuffed]

I looked at those, but if you cut the back of a peach teat you can fit them in the nut

Any of the options are better than the wydale teats IMO

What about these, same sort of idea as the big softy converter teat?www.milkingmachines.co.uk/uk2shop-71.htm
If I cut up a peach teat do I still use the valve bit of the wyedale, or do you take out the ball in the wyedale bit?

 

[Agrispeed]

View attachment 702438 What about these, same sort of idea as the big softy converter teat?www.milkingmachines.co.uk/uk2shop-71.htm
If I cut up a peach teat do I still use the valve bit of the wyedale, or do you take out the ball in the wyedale bit?

I cut the valve out of the peach teat so its flat and use the non-return valve from the Wydale. I have some bottles that don't have non-return valves in so I leave the peach teat one in for those, but it makes it a lot tighter to screw them up.

The conversion teats normally seem to be very expensive, but that one doesn't seem so bad, possibly a bit difficult to clean? I replace all the teats for each calving so If i can buy them all the same you can usually get a bulk discount...