guttler question

[JD-Kid]

thats the fella

 

[ReidyNZ]

the taca stuff or the tuffcote

i sold my tine drill and have gone back to a triple disc at times tine would be better just brought a big set of harrows so will spray let it die back few weeks before next spray harrow the hell out if it to rough it up also try and get seed /weed strike then spray drill

What the feck you mentioning that word in the same sentence...........no feckin comparison

Yes still doing tungsten coating (TAKA ) & I would put ours up against anything you have to compare, tungsten tiles ARE good but as stated, prone to breaking, tungsten coating far LESS LIKELY to suffer same issue

Would love to do a Guttler, I'm sure I could enhance it's life.............by about 5 fold, or more would even do ONE fer free to compare

combineguy, what are you using to coat yours ? be interested to know have you done discs b4 ?

 

[combineguy]

First time doing them, mainly for traction. Only every third scallop

Normal mig wire and a dispenser which drops bits of tungsten into the weld.

Will post some pics when it is done

 

[JD-Kid]

HAHAHAHA knew i would get a bite out of yer HAHAHA

if i still had tine drills i would be ripping the points off and getting reidy to coat them have had the tuffcoat on one brand of points and it wears under the TC chips then cracks off the TC chip reidys stuff has to wear the whole lot away far beter system ...

yer can buy me a beer later reidy

 

[FonterraFarmer]

HAHAHAHA knew i would get a bite out of yer HAHAHA

if i still had tine drills i would be ripping the points off and getting reidy to coat them have had the tuffcoat on one brand of points and it wears under the TC chips then cracks off the TC chip reidys stuff has to wear the whole lot away far beter system ...

yer can buy me a beer later reidy

Would that be Speight's or something better like Waikato???......

 

[benferg]

Hey Reidy, what about doing the prominent lip of a normal JD closing wheel?

 

[ReidyNZ]

HAHAHAHA knew i would get a bite out of yer HAHAHA

if i still had tine drills i would be ripping the points off and getting reidy to coat them have had the tuffcoat on one brand of points and it wears under the TC chips then cracks off the TC chip reidys stuff has to wear the whole lot away far beter system ...

yer can buy me a beer later reidy

 

[ReidyNZ]

Would that be Speight's or something better like Waikato???......

Wouldn wash the floor with Waikato - Speight's or Tui's fer me

 

[ReidyNZ]

Hey Reidy, what about doing the prominent lip of a normal JD closing wheel?

Done them for John Austin

 

[green giant]

What the feck you mentioning that word in the same sentence...........no feckin comparison

Yes still doing tungsten coating (TAKA ) & I would put ours up against anything you have to compare, tungsten tiles ARE good but as stated, prone to breaking, tungsten coating far LESS LIKELY to suffer same issue

Would love to do a Guttler, I'm sure I could enhance it's life.............by about 5 fold, or more would even do ONE fer free to compare

combineguy, what are you using to coat yours ? be interested to know have you done discs b4 ?

Pics Reidy???

 

[JD-Kid]

Wouldn wash the floor with Waikato - Speight's or Tui's fer me

must have been all the training yer did at the uni pub to say speight's .. any beer named after a river can't be good

 

[benferg]

Done them for John Austin

Now you've got me interested. I like the idea of the guttler but I don't think they'd last long in the country we drill (in & out of stone & abrasive soil in general).