Hanging a grain conveyor

[T C]

We are reusing a perry 30t conveyor in a new grain shed. It will hang from 3 rafters once in the shed
What is the best way to clamp brackets to the steel rafters.
Don't want to drill or weld.

 

[Cjm]

Angle iron brackets clamped to the RSJ with Lindapters.

 

[Cjm]

Girder Clamp Type A M12 Medium Tail, Lindapter | Lindapter Girder Clamps | Support Systems

www.orbitalfasteners.co.uk

Like these, but may need a different length tail depending on thickness of flange

 

[B R C]

Lindapters all the way, different sized tails and two sizes washers will get you to the right size for your flange.
this is 8mm plate M12 Lindapters

 

[T C]

Thanks the clips worked really well.
Next question is how to operate the slides.
I could use a pinion gear with a chain but could I use air rams?