Hgv turning width

[R J]

Hi all , just planning a bit of building redesign,
Can artic bulkers turn at 90° (between buildings ) from a 6m wide gap to a 10m wide gap ?
Thanks

 

[roscoe erf]

depends on the driver

 

[R J]

depends on the driver
[/QUOTE
Good point , generally all the ones that come to ours are pretty good ( they have to be to negotiate the actual roads just to get to the farm )

 

[upnortheast]

Google will bring up turning circles for artics.
Any artic drivers living nearby you could ask

 

[R J]

Google will bring up turning circles for artics.
Any artic drivers living nearby you could ask

I've had a look at Google and I'm pretty sure it's fine, just double checking with others thoughts ,

 

[roscoe erf]

I've had a look at Google and I'm pretty sure it's fine, just double checking with others thoughts ,

id need to see it tbh before i could say just seeing measurements on a forum means nowt to me

 

[Mur Huwcun]

If I’m interpreting the measurements correctly it’s the same as turning into a 30foot entrance from a 20 foot wide road? If so then yes

 

[R J]

If I’m interpreting the measurements correctly it’s the same as turning into a 30foot entrance from a 20 foot wide road? If so then yes

Yes that is about it , just no splay , as between buildings

 

[R J]

A quick technical drawing !
Cheers

 

[7610 super q]

They'll rip off that corner, it'll be fine.

 

[Doing it for the kids]

I don’t think the highways man would approve not that it matters.

it looks tight but I’m no expert, I’ve just seen a lot of technical planning Drawings to compare with

 

[roscoe erf]

View attachment 914725
A quick technical drawing !
Cheers

that does look tight any overhanging roofs or a picture would help

 

[R J]

that does look tight any overhanging roofs or a picture would help

Haven't really got a picture at the moment as we need to dismantle a lean to first ,
There wont be any overhang apart from guttering , if it turns out to be too tight we will just have to dismantle anouther bay ☹

 

[roscoe erf]

Haven't really got a picture at the moment as we need to dismantle a lean to first ,
There wont be any overhang apart from guttering , if it turns out to be too tight we will just have to dismantle anouther bay ☹

the problem is you wont be able to get right into the corners with a truck so the widths you've got become narrower iyswim and the trailer will cut in

 

[Lincsman]

They are not all the same is your problem, wheelbases vary etc.

 

[Fendt516profi]

Does it have to go from a 10m gap to a 6m gap to get back out

 

[24/7 farming]

I can run an autotrac (an autocad programme for checking stuff like this) on it on Monday when in the office, it looks doable tho.

 

[puppet]

It looks tight. More importantly how do they get out? Turning from 10m into 6m not the same?
Find a friendly artic in a yard and mark it out.

 

[R J]

Does it have to go from a 10m gap to a 6m gap to get back out

Yes that would be the plan hopefully

 

[R J]

I can run an autotrac (an autocad programme for checking stuff like this) on it on Monday when in the office, it looks doable tho.

Thanks