R J
Member
- Location
- Herefordshire
Would be going back the same way hopefully ,It looks tight. More importantly how do they get out? Turning from 10m into 6m not the same?
Find a friendly artic in a yard and mark it out.
Would be going back the same way hopefully ,It looks tight. More importantly how do they get out? Turning from 10m into 6m not the same?
Find a friendly artic in a yard and mark it out.
Sure hope VOSA don't see that rig!Ignore autotrac and all that fancy stuff.
Raided an old toy box, 14m artic length, job looks good though tight on the way out. No fee but no comeback either. View attachment 914778View attachment 914779View attachment 914780
Never had a full size artic here with a steering axle although oddly enough on a feed lorry and a stock lorry with shorter trailersDon't most trailers have a steering axle now?
That's the answer it should drive in tip the load then back out would get out easierIs it opening into a larger yard? Just curious as to how they were going to get turned arround.
They would be reversing off blind side. Not good for some drivers.That's the answer it should drive in tip the load then back out would get out easier
I find that very hard to believe, 4m into a 10m gateway where you can cut through on an angle would be quite do able but put hard boundaries in like buildings where you can’t cut through and have to turn 90 degrees and it just ain’t happening with a standard 45 foot articPiles of room, we run lorries the turn into our is yard 4 meters into 10meters