Horsch CO calibration

[MakinBacon]

Hello All,
I have just bought a CO 4 drill, with Accord metering and electric drive. It has the old style drill manager box. It is over doing the seed rate by nearly exactly 1.5 on fine seed. I have the fine seed slide across, it has calibrated, I have done a seed check on the box, which is fine, I have done the distance check which is spot on. I had a feeling that it was set for a 6m drill, but I have checked the set up in the controller, and it is set to 4000mm width. Anyone had similar, or have any ideas? Tia

 

[Power Harrow Pilot]

I have same drill and set up, and had exactly the same problem. Always weigh out first few ha’s, so soon realised, ended up setting box at 4 kg to end up sowing 6!! Also how do you turn off low seed warning??

 

[MakinBacon]

Hmmm, ok, so either we are both doing something wrong, or it is a common fault!
The low seed warning is turned off by pressing ‘any’ button, according to the manual, although it also says
that it will keep producing a warning at regular intervals