Horsch CO8

[TenAcre Hill]

I have a C8 Drill, but suffering with one side getting oil on the wrong side of the rams and consequently not allowing it to sow at the correct depth. Undoing a hose allowing the oil to escape solves it for a while. Have tried pressurising the lift and lower, as recommended in the manual, but this doesn't cure it.

 

[YELROM]

Does it have any accumulators on it as i have a bale wrapper that is getting oil the wrong side of a ram, i have replaced the seals in the ram and it is no better, the only other thing on the circuit is an accumulator so i am going to change that
Not sure if this is any help but worth checking

 

[TenAcre Hill]

No there are no accumulators
The rams work on a master and slave system