Hot pressure washers

[Rs chunk]

I’m in the middle of looking for another pressure washer too replace my old cleanwell and I have the option of some used machines both are 3 phase and both the same capacity, one is a Nixon and the other a Mac avant. What are people’s opinions on both machines the Mac looks slightly cleaner and it’s £300 more than the Nixon I’m wondering is it going to be worth the extra and the Nixon has had a new coil fitted

 

[Sharpy]

Surely you would be sensible to look at another Cleanwell?

 

[Rs chunk]

Surely you would be sensible to look at another Cleanwell?

Yes nothing wrong with them just my coil rotted and the housing it sits in and now it’s down on pressure and I’ve rebuilt the pump previously and had hairline cracks in it. All these machines use basically the same pumps and components

 

[Sharpy]

Yes nothing wrong with them just my coil rotted and the housing it sits in and now it’s down on pressure and I’ve rebuilt the pump previously and had hairline cracks in it. All these machines use basically the same pumps and components

Was just that I have been very impressed with my cleanwell, any firm that leaves a wiring diagram in a plastic bag inside its wired (not circuit boarded) control box has its customers in mind.

 

[Rs chunk]

Was just that I have been very impressed with my cleanwell, any firm that leaves a wiring diagram in a plastic bag inside its wired (not circuit boarded) control box has its customers in mind.

Shows it’s been built expecting it too get repaired in the future not thrown away like most modern stuff

 

[fermerboy]

Dont know about the others but have a hot Nixon here and so far its been faultless.
Nice simple machine, no circuit boards, standard components.
Only critisim I have is its either cold or hot, middle ground would be nice, but to be fair I knew that when I bought it.