How to remove reverse shuttle from MF 3120 with Dynashift

[Trev123]

Hi Help
My MF 3120 started to slip out of forward gear about a month ago. So I removed sidecover and found loose allen key on selector thought I was away in a hack. Things were perfect for a couple of weeks until one day I took my foot off clutch to a grating noise and NO GO. Got towed home and split tractor at clutch Took off sidecover and removed selector Undid 8 17mm bolts around housing but housing wont budge. I read in another forum "6170 dynashift removal" where it states there is a row of bolts along the top screwed in from under the cab I cant find these on my 3120 Thanks

 

[davedb]

You need to make a long bar with a plate on the end to bolt onto the unit where the clutch slave cylinder did then hang the bar from a engine crane ect as near to the gearbox as you can and use the other end as leverage to manoeuvre the unit out if you’ve undone the outer ring of bolts and got the side plate off it’s just the sealant holding it in

 

[Trev123]

Thanks for reply it will be end of week before I get back to it as I am back to work tommorrow

 

[Trev123]

Did as you suggested and out shuttle and dynashift came. Reverse / forward shuttle fork is completely wore out not gripping selector at all. Thanks for help