Listening to Mr Happy. No ordinary o ring won't work and you need the back up. Let me have a picture of the pump part number and I will look into a seal kit. Why do you require a seal kit @jd24?D standard o rings work on these seal grooves?
There is also a fine band on the inner seal....? View attachment 856921
Okay I think the relief valve in the end plate (spring cup and ball bearing) was and is leaking the cup is pitted but I can fixed that with my lathe(I can send pics) . I get flow and some pressure but not enough. I could push the ram back against the pump.Listening to Mr Happy. No ordinary o ring won't work and you need the back up. Let me have a picture of the pump part number and I will look into a seal kit. Why do you require a seal kit @jd24?
PumpMight need to strip the pump to inspect/measure for wear?
That looks like a Sunstrand steering pump to me. So could please post a picture of the name plate. What's the pump fitted to?Pump
View attachment 856939
Relief valve? close ups View attachment 856940
View attachment 856943
View attachment 856946
Its a UTB universal 550 tractor on the power steering.That looks like a Sunstrand steering pump to me. So could please post a picture of the name plate. What's the pump fitted to?
When you say expensive... how much? If can find a pump why can't the supplier sell you a seal kit?Not a problem....obviously I could just find a new pump but steering pumps seem quite expensive....