Hydraulic top link

[bobk]

Need one for the ploughs really as clearance is tight when turning over , do they have a stop when you return to operating length ?

 

[davidroberts30]

No

Best you will do is have a scale on it so you can set it back

 

[bobk]

No

Best you will do is have a scale on it so you can set it back

That's no use sadly .

 

[Bury the Trash]

use one without the 'creep' valve and put the spool valve hes plumbed into in float when in work plough should be allowed to move a bit anyway.
making one is not all that difficult , big one mind.

but being able to semi mount for transport is best (safer) with the above

 

[homefarm]

Have you tried the lowest hole for the top link and different hole for the lower links. Lowest top link hole made a big difference to ours.

 

[bobk]

Have you tried the lowest hole for the top link and different hole for the lower links. Lowest top link hole made a big difference to ours.

I'll try that , thanks

 

[snipe]

Top link in top hole on plough and bottom arms in lowest. Can you shorten link rods on the tractor. What plough, tractor, and front weight do you have.

 

[Lofty1984]

You could set a timer on the spool if elec

 

[Dave645]

Have you tried the lowest hole for the top link and different hole for the lower links. Lowest top link hole made a big difference to ours.

Yes this, and lift arm lift arm length will change the lift geometry, I have a vari width plough when at 20” or more turn over was tricky, shortening the lift arm lift rods can help as it increases the max lift height.