Ifor williams suspension

Lincs Lass

Member
Location
north lincs
Had a look at my trailer this morning and discovered theres abit of slop in the spring bushes ,,wondering if its replacing the complete leaf spring as they come with bushes or just pressing out the worn ones and renewing the bushes and bolts ,,I know which is the cheaper option but the trailer is 15 years old and on its original springs .
It gets alot of weighty work
 

Martin Holden

Member
Trade
Location
Cheltenham
Had a look at my trailer this morning and discovered theres abit of slop in the spring bushes ,,wondering if its replacing the complete leaf spring as they come with bushes or just pressing out the worn ones and renewing the bushes and bolts ,,I know which is the cheaper option but the trailer is 15 years old and on its original springs .
It gets alot of weighty work
Probably worth changing the complete assembly if you intend to keep the trailer. Spring steel does “relax” over time so its effectiveness lessens. Whether the new ones would last as long as the originals is quite another question. Value engineering tends to see cheaper components employed including steel spec’. Not suggesting that is what IW do, but would be worth asking the question.
 

Lincs Lass

Member
Location
north lincs
Tried Trailer Teck ,Barlows ,western towing and a few other but non of them sell full axle sets ,all seperate parts which gets a bit pricey .
Pik Trailers at Nottingham on ebay look the best price
 

Lincs Lass

Member
Location
north lincs
No,1600 inc vat ,over 3000 to swap ,,their excuse was ,by the time it went through the workshop ,they would re sell it for 2500 +vat and Ive seen plenty on ebay priced at 2500-3000 but not selling ,,
 
Location
lincs
If it’s just the bush at the front and you hear it rattling we replaced the bush only.just heated it a bit and thrashed it out,can’t remember but don’t think I cut it through.i do remember it was both front springs on ours only,took an hour tops from start to finish.it was just wiggling a little and noisy.certainly not as hard As I thought it would be.i think if you take out front bolts and lower with jockey wheel you can wedge it against the chassis to thrash it.sure someone will say not to heat it but mine heave been fine,must be six or eight years ago.
 

Lincs Lass

Member
Location
north lincs
That's cured it,another 15 years of life,gave it the whole hog
20191122_132950.jpg
20191122_132956.jpg
20191122_133009.jpg
had to get a bit persuasive
 

Will you help clear snow?

  • yes

    Votes: 71 32.0%
  • no

    Votes: 151 68.0%

The London Palladium event “BPR Seminar”

  • 15,122
  • 234
This is our next step following the London rally 🚜

BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth

Join us @LondonPalladium on the 16th for beginning of UK business fight back👍

Back
Top