ifor williams ta5 wheel bearings

[spin cycle]

need to buy some of the above....part number wrm 463 75 55 10.....doesn't bare resemblence to part numbers online.....help

 

[Ukjay]

In absence of knowing the age of the trailer, anything in here help id the bearing:

https://www.iwt.co.uk/iwt-parts/

 

[spin cycle]

thanks but 'been there'...not helped a great deal.....think i've found them though....just gotta have a measure up

 

[Kevm]

This is who I have used for Ifor parts, very helpful people.
https://www.towingandtrailers.com/

 

[nick...]

This lot are great
Www.trailertek.co.uk
Nick...

 

[pine_guy]

My local firm are very good and reasonably priced for genuine parts.
http://www.alantuertrailers.co.uk/

 

[spin cycle]

This lot are great
Www.trailertek.co.uk
Nick...

twice the price of the ones i've found....both 'european bearings'.....think i've found right ones....only seem to be one type.....inside measurement right...outer measurement is only 65mm when it should be 71.3mm....unless it's measured 'in the shell'

 

[JeepJeep]

These the sealed ones rather than the 2 halves and seal?.... 77 55 10 only brings up a seal here.

Lot of the other ifor bearings I've seen cross reference

 

[spin cycle]

These the sealed ones rather than the 2 halves and seal?.... 77 55 10 only brings up a seal here.

Lot of the other ifor bearings I've seen cross reference

yep the 77 55 10 is the seal....the bearings are two tapered and two shells....the kits i've seen have the right seal...so i guess the bearings are right

 

[JeepJeep]

18590/18520 bearings are we looking at?

 

[spin cycle]

18590/18520 bearings are we looking at?

yep.....when you take the external measurment would you include the shell....i guess you would

 

[JeepJeep]

It's in inches... There always Cross ref numbers with Timken listings.

Timken 18590

Timken 18520

 

[spin cycle]

It's in inches... There always Cross ref numbers with Timken listings.

Timken 18590

View attachment 746254

Timken 18520

View attachment 746258

that cup width 2.875' equates to 73mm....so that looks right....thanks think i'm sorted

 

[nick...]

twice the price of the ones i've found....both 'european bearings'.....think i've found right ones....only seem to be one type.....inside measurement right...outer measurement is only 65mm when it should be 71.3mm....unless it's measured 'in the shell'

Allways found them very competitive
Nick...

 

[spin cycle]

Allways found them very competitive
Nick...

ever go to the bearings place in horsham st faiths

 

[nick...]

Have done in the past but wrong side of city for me.no doubt easier now the ndr is open but I use Hayley’s up near Asda and Norfolk trailers.have you tried agrico trailers in Ipswich,or needham market.got my new trailer from them and found em very helpful
Nick...

 

[spin cycle]

Have done in the past but wrong side of city for me.no doubt easier now the ndr is open but I use Hayley’s up near Asda and Norfolk trailers.have you tried agrico trailers in Ipswich,or needham market.got my new trailer from them and found em very helpful
Nick...

ipswich.....thats 75 miles away