IH 1255xl draft rod settings

[SuperTwo]

Would anybody have the relevant section of the workshop manual to show how to correctly set the draft rod on a 1255xl?
The draft isn't lifting the plough when hitting a tough spot I have to do it manually at the moment.

Thanks.

 

[Hjo1]

Hi, it is possible to download at https://www.maskinisten.net/downloads.php?view=detail&df_id=23354
You have to register as a member (bli medlem) but it is no cost for this.

 

[Gapples]

This is what's inside that draft rod.
Unfortunately I haven't got the settings information & I can't find it, I've asked around mates but no one has it !
I lost my 55 series training manual many years ago when I loaned it to someone at another dealer & it disappeared !!!
But just make sure everything is intact inside the rod, then there should be no play on the rod.
I can't remember exactly how you set it up, there's a set length you use then screw the top adjustment so far.

 

[SuperTwo]

Hi, it is possible to download at https://www.maskinisten.net/downloads.php?view=detail&df_id=23354
You have to register as a member (bli medlem) but it is no cost for this.

Thank you I will try this.

 

[SuperTwo]

This is what's inside that draft rod.
Unfortunately I haven't got the settings information & I can't find it, I've asked around mates but no one has it !
I lost my 55 series training manual many years ago when I loaned it to someone at another dealer & it disappeared !!!
But just make sure everything is intact inside the rod, then there should be no play on the rod.
I can't remember exactly how you set it up, there's a set length you use then screw the top adjustment so far.

Thanks for taking the time to look, unfortunately the link above doesn't have info i need.
I will try my local Case dealer to see if they have the relevant manuals.
I dont want to mess with it until I know exactly what I'm doing.

 

[Gapples]

Thanks for taking the time to look, unfortunately the link above doesn't have info i need.
I will try my local Case dealer to see if they have the relevant manuals.
I dont want to mess with it until I know exactly what I'm doing.

Hope this helps

 

[SuperTwo]

Hope this helps

Brilliant stuff, i hope to get working on this on Saturday.
Currently when in draft control the arms won't begin to lift until position lever is pulled all the way back,
according to the photos above it should begin lifting between 7 and 8 so it looks like some adjustment is needed.

 

[SuperTwo]

Worked like a charm.
Thanks again @Gapples very much appreciated.

 

[Gapples]

Worked like a charm.
Thanks again @Gapples very much appreciated.

Magic, I'm pleased you got it sorted...