JCB 310s engine error

[Arceye]

Hi guys is it possible to display error codes on a 310s?
I keep getting the red engine error and losing power with a juddery engine. Turn off and on again and it can be fine. It goes days with nothing and then sometimes a real PITA.
Fuel filter changes make no difference and it nearly always happens at low revs never whilst on the road.
Bit loathed to call out Pecks or whoever because I know it won't give the problem with the guy standing there.
Would fuel additive help of make it worse by dislodging crap, strange one.
Ian

 

[davidroberts30]

Not the best of description but check all plugs around the engine

 

[FarmerPhil87]

My 310s was doing something similar last year first I was told it was a sensor sooted up changed it and it was better for a while but it started doing it again then it turned out to be a problem with one of the injectors.

 

[Arceye]

My 310s was doing something similar last year first I was told it was a sensor sooted up changed it and it was better for a while but it started doing it again then it turned out to be a problem with one of the injectors.

Thanks, my guessing is an injector. Did you change them all or just the faulty one?

 

[FarmerPhil87]

Thanks, my guessing is an injector. Did you change them all or just the faulty one?

We changed them all they were exchanged for reconditioned ones I’m not sure exactly who they went to somebody around Newcastle somewhere it just meant it was out of action for about a week. The sensor I was speaking about is the tmap sensor it would be worth a look to see if it is choked up it knocks the air mix all wrong if it is and the engine runs like a sack of spanners.

 

[davidroberts30]

Merlin diesel are about 200 each service exchange