- Location
- Norfolk
Anyone breaking a 3d or know someone, need a replacement boom if possible prefer east anglia TIA
JCB 3D mk2
- Thread starter haggard143
- Start date
Fivedoors
Member
- Location
- Leicestershire
At a last resort there is vicarage plant north kilworth Leicester they break jcb’s
startinghandle
Member
What is problem with boom??
- Location
- Norfolk
I was wondering if a 3c boom fits but to me it looks different but maybe someone could let me know
Last edited:
- Location
- Norfolk
Cracked both bottom bearings/pivot,in fact when i took boom off one fell off? either weld up or prefer replacement boom or get newer machine but would still like to put back together
startinghandle
Member
What condition is rest of machine?
- Location
- Norfolk
Not showroom condition
for sure but won't scrap and will put back together one way or otherDo you mean the bit where the big long pin goes through?
- Location
- Norfolk
yes.at the bottom of boom
V everything out well and turn the welder well up and weld it back on would likely be the best plan. The ''C'' boom is certainly shorter but I think it would fit at the bottom. You'd likely need to change the boom ram too though as the ''D'' one would be too long........as would the dipper ram ,come to think of it.....
Simon Vicary of Vicary Plant would know. Best speak to him.
Simon Vicary of Vicary Plant would know. Best speak to him.
- Location
- Norfolk
may well end up welding,but was broken/plated long before we had it and we've had it since i was at schoolV everything out well and turn the welder well up and weld it back on would likely be the best plan. The ''C'' boom is certainly shorter but I think it would fit at the bottom. You'd likely need to change the boom ram too though as the ''D'' one would be too long........as would the dipper ram ,come to think of it.....
Simon Vicary of Vicary Plant would know. Best speak to him.