Hi there,
I have a Jcb 540-170 with a few faults.
The main one is the engine cuts out in 4th gear when you give it full throttle it picks up speed and then just turn off. Drive 15 fleet.
If you go easy on it it will stay going 1/4 throttle no problem. It manages to stay going in 1st, 2nd and 3rd full throttle take offs. It will cut out when loaded in the gears. It is 2013 newer generation commenrail set up.
Next problem is sometimes when just after started with the forward and reverse won't work using the stalk. Just turn her off and on again and it's OK again.
Last issue is left indicators work fine and right side is dead. Any ideas on what this could be.
Any help would be much appreciated.
I have a Jcb 540-170 with a few faults.
The main one is the engine cuts out in 4th gear when you give it full throttle it picks up speed and then just turn off. Drive 15 fleet.
If you go easy on it it will stay going 1/4 throttle no problem. It manages to stay going in 1st, 2nd and 3rd full throttle take offs. It will cut out when loaded in the gears. It is 2013 newer generation commenrail set up.
Next problem is sometimes when just after started with the forward and reverse won't work using the stalk. Just turn her off and on again and it's OK again.
Last issue is left indicators work fine and right side is dead. Any ideas on what this could be.
Any help would be much appreciated.
