JCB fastrac 2150 free flow return

[Tobe_k85]

Morning all, I need to put a free flow return onto my 2150 to run a hydraulic fan, can anyone advise the best place for this or better still anyone who's done it and can post a pic please? I can't see an obvious blanking plug to remove to install. I have the coupler. Thanks in advance

 

[JCB_JCR]

Connector next to hydraulic brake connector, is free flow return, on back of my 2140.

 

[Tobe_k85]

Thanks, I'll have a look next time I'm at the tractor. Is it just a half inch coupler? I thought my air was next to the hydraulic brake output but I've not looked for a while.

 

[Tobe_k85]

 

[JCB_JCR]

Yes half inch. The one between the air and hydraulic brake connectors. If you follow the hose under the tray it'll lead to a metal pipe on the chassis rail which takes all oil returns into oil tank.

I've never needed to use it.

 

[Tobe_k85]

Ah spot on. I'll check pipe work just to be sure then swap to a 3/4 coupler. Thanks for the input