landyford
Member
- Location
- herts/bucks
John Deere1030 struggling to lift on 3 point linkage also oil around hyd pump?
John Deere 1030
- Thread starter landyford
- Start date
- Location
- Sth Africa
Need a little more info.
What are you lifting?.
Have you check the suction screen.. hyd oil change?.. filter??.
What are you lifting?.
Have you check the suction screen.. hyd oil change?.. filter??.
landyford
Member
- Location
- herts/bucks
Just lifting the arms, it's a friends tractor I normally fix Ford's and masseys but he said you have to help the arms up by hand but sinks down and the pump is pushing oil out? He sent me this photo not that it really helps haha
- Location
- Sth Africa
First thing... lift the arms up with nothing on them... close the rate of drop off completely. This will tell us if the piston seals is leaking letting the arms drop. Make sure the there is nothing on the arms as well.
Next remove the cover under the pump.. between the axle and pump. 2 x 9/16 bolts. There is a leak off line of rubber that can break off the pump.. its rubber so hopefully that has gotten hard and broken off the pump nipple it belongs on.
Next remove the cover under the pump.. between the axle and pump. 2 x 9/16 bolts. There is a leak off line of rubber that can break off the pump.. its rubber so hopefully that has gotten hard and broken off the pump nipple it belongs on.
- Location
- Sth Africa
Howd you go??..did the arms still drop with rate of drop shutoff?.