John deere 2058

[Wjg]

Just took the concave out of our 2058 and it's in 2 halves with a space of about 2inches between the top and bottom halves anyone know what this is space is for cheers

 

[Timbo]

Just took the concave out of our 2058 and it's in 2 halves with a space of about 2inches between the top and bottom halves anyone know what this is space is for cheers

Picture?

De-awning plates perhaps ??

 

[Wjg]

Picture?

De-awning plates perhaps ??

De awning plates was what I thought but then would they not need to be closer to the front of the concave

 

[Flat 10]

Don’t think my 2054 looks like that, I will check when I’m next there. Quite a bend in it this end....

 

[Wjg]

Don’t think my 2054 looks like that, I will check when I’m next there. Quite a bend in it this end....

I've never come across one like it either! I'm replacing it anyway it was something fairly hard to bend the bars that's for sure
It was before she came to us

 

[Timbo]

De awning plates was what I thought but then would they not need to be closer to the front of the concave

Not what I was expecting either !!!

 

[5020man]

Hi.
Its broken.
The two parts should be on same arc.
Its cracked between the 4th and 5th bar from the rear.

5020 man

 

[Wjg]

The top part bolts onto the bottom we had to split them to get it out just didnt get them back together for the photo both parts are all on the same arc when they are bolted together.

 

[5020man]

Hi.
Mine doesn't have wires in the rear 4 bars.
But it does not need the deawner to thrash barley.

5020 man