John Deere wheel angle sensor (155r)

[paul&mandy]

Got an error code come up that its low voltage. Presume it's a new sensor but is it a laptop job too?

 

[Pheasant Surprise]

Have you tried re-calibrating it?

 

[paul&mandy]

Have you tried re-calibrating it?

Would it show up an error code with low voltage if it just needed calibrating? Even if I put a new sensor on is it such a thing I can do without a laptop plugged in?

 

[Pheasant Surprise]

Would it show up an error code with low voltage if it just needed calibrating? Even if I put a new sensor on is it such a thing I can do without a laptop plugged in?

You should be able to calibrate it from the settings menu on your screen. No laptop is generally required for wheel angle sensor calibration. It will either pass or fail. If it fails, inspect/clean the wiring terminals and repeat before you go buying and fitting a new sensor.

 

[paul&mandy]

You should be able to calibrate it from the settings menu on your screen. No laptop is generally required for wheel angle sensor calibration. It will either pass or fail. If it fails, inspect/clean the wiring terminals and repeat before you go buying and fitting a new sensor.

Wished my dealer told me I could do that. Will give it a go. Thanks