Joskin macerator

[6210r]

Looking to rebuild the macerator on a joskin 7.5mtr trailing shoe. Just wondering if anyone knows the best place to source parts and what kind of cost is involved?

 

[Thick cut]

Where in the country are you ? As Buglers in Dorest and Toppins in Cumbria seem to be the best for Joskin parts. You will need to measure the macerator disc and number of small discs fitted as many different sizes.

 

[Rsockett]

Tramspread are Joskin dealers and fit the macerators to their smaller dribble bars they prob keep spares on the shelf?

 

[Blue.]

My joskin macerator parts came off tramspread.?

 

[james ds]

I solved the problem with my joskin , I sold it . I have an agri quip now and it has a lot less wearing parts and gives no trouble , I was fed up getting up taking out bits of stones from the joskin .

 

[6210r]

My joskin macerator parts came off tramspead?

 

[6210r]

Thanks for the replies when I took the revolving plate off with the cutting discs on the stainless. Nuts was welded to it!! Is this normal?? And also the bolts also had a tack of weld to stop them coming undone??

 

[6210r]

Thanks for the replies...got new discs today when I took the old one off the stainless nuts were weld to the revolving plate? Is this normal? Also the bolts had a tack of weld on to stop them coming undone? Again is this the way to do it.

 

[Blue.]

Thanks for the replies when I took the revolving plate off with the cutting discs on the stainless. Nuts was welded to it!! Is this normal?? And also the bolts also had a tack of weld to stop them coming undone??

They have a special type nut and bolt to hold the disc,mine has done over 10m gallons with no noticeable wear.

 

[Thick cut]

They have a special type nut and bolt to hold the disc,mine has done over 10m gallons with no noticeable wear.

I have always welded the nut flat sides to the main disc after tightening the bolt as it helps the holes on the disc from wearing.