khun flow factor

[watfordfrosty]

has anyone got the flow factor settings for granular urea please and double top for khun axera speader have lost the bit of paper they were all written on thanks

 

[Rob Holmes]

Our Axis had a FF of 0.68 yesterday

Can't you do a calibration?

 

[watfordfrosty]

yes i could but i thought i would ask set it where think spread 50 ha then check to be honest providing i know what has gone on i can increase or decrease next pass the difference between 45-55 kg /ha int as important as getting some on if it freezes tonight and i can go first thing in the morning ,cheers for letting me know Rob

 

[Stoxs]

I have mine set on 0.72

not to far out, this is for granular urea from Bunns

still cant quiet get my head around these spreaders because when you look at the flow factors after using it it has changed.

hope this helps

 

[AlfM]

Yara urea should be M 0.7 according to https://streutabellen.rauch-communi...GeschwindigkeitSelect=selected&stat=5&fgsel=8

Doubletop M 1.0 https://streutabellen.rauch-communi...GeschwindigkeitSelect=selected&stat=5&fgsel=8

Ah that seems to both go to the Doubletop, but go back by pressing N Fertilisers at the top and go to Urea.