Hi, hopefully someone can give me a hand with this.
We've swapped our Same Iron for a Deutz 6140 TTV, we'd like to get a simple speed readout from the tractor to the Calibrator for our tillage spreader. KRM dealer advised that we just plug in to the 7 pin socket in the cab but we've only got the 9 pin isobus - I don't suppose there could be something as simple as a cable we can get hold of that will allow us to connect from the 9 pin cab terminal to the Calibrator (Calibrator has either a TRS jack in for an impulse or what looks like a dsub connector)?
Obviously we can return to the dark ages and fit the sensor back on that generates an impulse from the wheel studs but it would be nice if we can just plug straight in to what's already there.
We're also wondering if it's time to get a proper ground speed radar fitted...
We've swapped our Same Iron for a Deutz 6140 TTV, we'd like to get a simple speed readout from the tractor to the Calibrator for our tillage spreader. KRM dealer advised that we just plug in to the 7 pin socket in the cab but we've only got the 9 pin isobus - I don't suppose there could be something as simple as a cable we can get hold of that will allow us to connect from the 9 pin cab terminal to the Calibrator (Calibrator has either a TRS jack in for an impulse or what looks like a dsub connector)?
Obviously we can return to the dark ages and fit the sensor back on that generates an impulse from the wheel studs but it would be nice if we can just plug straight in to what's already there.
We're also wondering if it's time to get a proper ground speed radar fitted...
