Pheasant Surprise
Member
- Location
- Woodbridge, Suffolk
Has anyone by some freak chance got a pinout assignment for a Kuhn VT 50 terminal (the 8-way "CAN1-IN" port M12 connector please)? Or maybe even a user manual?
Alternatively does anyone know if Kuhn make an ISOBUS adapter cable that goes from this M12 connector on the back of the box to a standard 9-way ISOBUS in-cab plug?
I'm trying to help out a member here, who is trying to connect this terminal up to his baler via the tractor ISOBUS socket. The problem is the supplied connecting cable (part 83233134) for the box splits out to two Deutsch connectors - a 6-cavity DT socket (positions 2, 3, 4 and 5 are cabled) and a 4-cavity DT plug (positions 2 and 4 are cabled). Think this cable is actually supposed to connect to another Kuhn supplied bit of harness for their own ISOBUS implement socket etc. See attached.
I've sort of worked out (I think!) what signals pins are, from various sources, but don't want to risk knackering it through duff info
Ta.
Alternatively does anyone know if Kuhn make an ISOBUS adapter cable that goes from this M12 connector on the back of the box to a standard 9-way ISOBUS in-cab plug?
I'm trying to help out a member here, who is trying to connect this terminal up to his baler via the tractor ISOBUS socket. The problem is the supplied connecting cable (part 83233134) for the box splits out to two Deutsch connectors - a 6-cavity DT socket (positions 2, 3, 4 and 5 are cabled) and a 4-cavity DT plug (positions 2 and 4 are cabled). Think this cable is actually supposed to connect to another Kuhn supplied bit of harness for their own ISOBUS implement socket etc. See attached.
I've sort of worked out (I think!) what signals pins are, from various sources, but don't want to risk knackering it through duff info
Ta.
Attachments
Last edited: