Kverneland plough breakers

[Agri Spec Solicitor]

We have an old 1994 LD manual vari width 4f Kverneland plough.
We need a ram from something like an LB plough to convert it into hydraulic vari width.
If anyone knows of any KV plough breakers who might be able to help, or actually has such a ram we would be pleased to hear from you.
Thanks.

 

[KB6930]

Surely being a D is it not bolts to move the furrow width ? I'm used to ED ES EG Ploughs and a ED it needs bolts taken out and moved to change the width

 

[KennyO]

I seem to think you are up here ( E Scotland) if so Ernest Charleton at Kirrie was dealing in ploughs and parts.

 

[Agri Spec Solicitor]

Thanks for the comments. I have not done very well describing it!
I am attaching a photo of the horizontal adjuster which looks a bit like a top link. It moves the whole rear of the plough L or R to adjust the front furrow width. Other models have the ram I want instead of that top link adjuster.

 

[KB6930]

Thanks for the comments. I have not done very well describing it!
I am attaching a photo of the horizontal adjuster which looks a bit like a top link. It moves the whole rear of the plough L or R to adjust the front furrow width. Other models have the ram I want instead of that top link adjuster.

You just need a ram with a clevis either end we used to have one on our 3 furrow match plough . Keeping the pipes out the way is a challenge tho

 

[Agri Spec Solicitor]

I seem to think you are up here ( E Scotland) if so Ernest Charleton at Kirrie was dealing in ploughs and parts.

Thanks so much for the advice. I made contact with Ernest who had what we need. Deal done and just waiting for delivery .

 

[Ed15677]

Hi can you send me his phone number please because I am after a rear disc

 

[Agri Spec Solicitor]

Pm me your number and I will be pleased to pass it on. Sounds like lots of ploughs being broken not just one.