LED lights causing radio interference

[UTV Products]

Hi, I’ll try and put some more details later. But you need to know the Actual Lumens against the theoretical lumens. Eg a Nordic N4402 (50W) has 6700 theoretical lumens while producing 4200 actual lumens. Some manufacturers/websites only state the higher theoretical value.


https://www.nordiclights.com/faq/

G

Agree with Graham

 

[UTV Products]

Look good and sure they’re the daddies but would cost an arm and leg, I’ve 4 on the back and 8 on the front that would cost multiples of hundreds.

Just put my songs on my phone when dark.

View attachment 719912

Nice image taken there

 

[UTV Products]

10 x 39w oval GO625's on my 7499 & two KLs i think they are 28w each.
if someone made a direct oval flush replacement LED of the same quality for upper front of these massey cabs
id buy 8 of them & change both tractors that have them totally useless 55w hella halogens in from new.
The Light transformation is unreal

Your oval flush mounts on Massey anything like the one posted here please?

 

[UTV Products]

Your oval flush mounts on Massey anything like the one posted here please?

Similar to this one in a style suited to Fendt, some Massey, Case MS, some Claas in particular Challenger and Lexion combine

 

[Farma Parma]

Your oval flush mounts on Massey anything like the one posted here please?

ya no far off.
need to just be the oval part tho, cant use any of that black rectangle surround in any way.
The rectangle ones you also have pictured are similar to sparex ones which i have in older 6100 series massey.
they just glare but are very bright.

 

[robandles]

So is there a like for like oval one for the MF? Specifically for me on a 5445.
Mine has four candles and would like two floods mixed with two spots or would a combined lightbar be better assuming one can be bought that fits between the outer two current lights.

 

[UTV Products]

ya no far off.
need to just be the oval part tho, cant use any of that black rectangle surround in any way.
The rectangle ones you also have pictured are similar to sparex ones which i have in older 6100 series massey.
they just glare but are very bright.

Yes saw the Sparex model whilst in Germany recently. It has a very different lens to ours and different type of led chip. We receive shipment of our comparison to that light later today, then can properly trial ours in darkness on a tractor. Will let you know thoughts and findings later but looking at our lens type - we should have a far better light beam control. Your comments appreciated as always.

 

[UTV Products]

So is there a like for like oval one for the MF? Specifically for me on a 5445.
Mine has four candles and would like two floods mixed with two spots or would a combined lightbar be better assuming one can be bought that fits between the outer two current lights.

We need to get a few measurements or sample of your light and must (should) be possible to match up. Any feedback or help you can give us to help you greatly appreciated. Regards Martin

 

[Grassman]

I had that problem with LED beacons, now I listen to the radio though BBC iplayer radio app on phone and connect to tractor either by bluetooth or aux cable

Same here. Solved all the problems. Just use the radio player app. Blue tooth connection from phone to radio.
Perfect signal virtually everywhere.
Simples

 

[Robt]

But you haven’t solved the problem, you have just ignored it!!!!! Brexit anyone

 

[agrotron]

Does anyone do a replacement for the top lights on a new holland t6020 as pic below.

Thanks in advance.

 

[UTV Products]

Not aware myself but not to say there is not one out there. I am wondering how that fits behind and if something we already have will adapt. Looks like a clip under the light?

 

[UTV Products]

Can send you a light to try for adaption or replacement if you a bit handy....

 

[agrotron]

Can send you a light to try for adaption or replacement if you a bit handy....

Thanks for the speedy response. Have you got the dimensions of your light and I will have a look to see if it will fit. I haven’t had a proper look to see how the original fits but it does appear to be a type of clip holding it in.

Cheers

 

[UTV Products]

Need to get exact measurements off a light. Approx 6 x 4 inch external and usually about 3 inch depth. Let me know what you find and can overcome by working together. Regards Martin

 

[Graham Smith]

I have made adaptor brackets to fit specific machines. The images are of the Go 625 installed on a New Holland and also the N2401 LED. I've also had some brackets made, so that the current plastic halogen brackets can be removed and LEDs fitted. This works well as the old lights can then be fitted back to the machine if you sell it (you can then keep the LED units for other tractors etc).

 

[James]

Pics on me masseysView attachment 719790View attachment 719792View attachment 719796View attachment 719798View attachment 719800View attachment 719802

What part number are those lights please? Also are the ones on the back mudguard hard to get the wires for?

 

[Farma Parma]

What part number are those lights please? Also are the ones on the back mudguard hard to get the wires for?

Part No. hangon
There the Go625 series on Nordics site & should be on RetroFit parts also.
I'll find the links Standby

 

[Farma Parma]

What part number are those lights please? Also are the ones on the back mudguard hard to get the wires for?

http://www.retrofitparts.co.uk/led-worklights/antares-go-625-39w-led-light-flood.html

Round Square or Oval take your pick
Poss the best LED Lights out there atm Value for what your getting anyways & fully branded & all the spec & best electrical screening money can poss get. V well made.... to last....
https://www.nordiclights.com/products-categories/go-series/

There that good i have another order planned soon.

 

[Farma Parma]

What part number are those lights please? Also are the ones on the back mudguard hard to get the wires for?

soz the back mudguards wires ?
Is the tractor your planning on fitting these not got the factory halogens on allready ??