Led on jd 2650

[will6910]

Got some led for my 2650. It’s the low profile yellow roof one. First light I put on top left. Worked perfect, turned all off. Went did right lihht the exact same way, turned on and both won’t work now. Have checked and replaced all fuses down the left side of steering column. What else would causing it ?
Thanks

 

[Teddy99]

Not sure , did you check have you 12 volts at the led light ? Check it with a volt meter or check it with a bulb .

Or run a wire direct to the led light and see does it light .This would rule out a problem with the led light .

 

[will6910]

The one side was working first then both has stopped since put on obent side one. Can’t find any other fussed at all

 

[Teddy99]

Check that you have power /12 volts at the light .

 

[Tomr10]

How have you wired them have you wited the lights together

 

[will6910]

Did last side first. Just used the wires that was there from old lights. Left side light worked perfectly. Till other got plugged in then neither worked. Plugged right side out again but left still isn’t working

 

[Tomr10]

Test the lights direct

 

[Mursal]

Fuse blown?

 

[will6910]

Fuse blown?

Checked fuses and replaced some that looked iffy but still no action. Unless There’s a hidden one somewhere

 

[Teddy99]

Forget about checking the fuses for the moment.
Check that you have 12 volts at the connection that is supplying the led lights.

 

[will6910]

Il try. Don’t think have a voltage meter tho

 

[Teddy99]

You could make up a test light, use a 12 volt bulb with 2 wires , one for earth and the other for live. Or if you have a old 12 volt light off the tractor that works , plug that into the connection you're using to power the LEDs . See have you power there.

 

[Teddy99]

Does the ignition switch need to be turned on to supply power to those lights ?

 

[will6910]

Yeah have to turn key full way round. Then there is a switch to switch from the spot lights to the head lights as both can’t be on at same time

 

[will6910]

Sorted now I think. They have 3 wires goijf to original lights, I put connection on all 3 and tested until two matches and made light work. So when left light worked I cut connection off the spare wire and taped it up. Then for some reason when I went to other lihht and did the same it decided that the other wire was the wire that was needed. Thanks for all the advice. Sorry for wasting your time

 

[Teddy99]

Well done , and you're wasting no one's time.

That's what forums are for - to ask for help.

 

[will6910]

Thatl teach family who said couldn’t do it myself. Have 6 led put on my 6910 and now 4 on loader. I’m pleased even if they aren’t

 

[Teddy99]

Lol

 

[will6910]

Cheers for the help

 

[Teddy99]

Glad I could help ?