Lemken drill disc coulters

[gpcwm]

Looking at buying a 2nd hand lemken solitair its done a bit of work and im pretty sure discs need changing to get enough depth. So questions are
1. Is it an easy enough job to change discs
2. If bearings in hubs need doing can you just change bearings or do they need to be complete hubs.
Anything else to look out for. Its not gonna do a huge amount of acreage work but i want it right.

 

[Dcol]

A full set of bushes bearings and discs could get up to €150 per coulter, easy enough but a good bit of time involved.

 

[Zebbedee]

Yea pretty simple to do, how many acres has it done? Discs can do a lot of acres before needing changed getting depth is not normally a problem, shims are behind bearings so once they are all removed and too much gap between the discs then it would be time to change. Bearings are easy changed and normally just on an as needed basis.