Lift cover super dexta

[tomlad]

Lift cover for s dexta , complete but open to suggestions , or possibly back.end ??

Nr preston
Mine has odd hydraulics so swapping cover seems next option
Tia tom

 

[startinghandle]

Can you explain odd hydraulics???

 

[tomlad]

Would be a long post sir.
Been in there many times.
New cam follower pin
New seals , or all i can find
Arms bob bad
Worse as oil warms
Pull aux , hold up for ages
Changed some internal linkage
Not much had any effect , or only given new problems.
Hence my logic swap the whole bloody thing.

 

[tomlad]

Im not meaning to b disrespectful to help .
Ill have some very long threads on the fordson forum Friends re. It .
Swapped little block ,forgotten its name for the hydrualic speed control. No different.
If u slow speed down to twitch is less noticeable untill it warms or ur carrying something heavy, then the whole tractor twitches.
It might b linkage fighting itself but i honestly think its leaking internally.
I have taken out the check valve seat which i shouldn't have done , but the issues are same before as after .
Also plug to seal a valve, unloading valve ? , was loose , had that re machined , did he take to much out ???
One of those if this done sort it i aint fefin messin no more jobs bit here i am.