Lifting a wooden grain floor

[eagleye]

yes we had uneven floor on our shed but self leveller compound not stood over by supplier so we had to work with cutting bearers. Next floor we relaid concrete to be level first.

 

[Wilksy]

I've been helping a farmer with just such a job going this morning to concrete a ramp, is been a hard job as was said, lifted the sections with a telehandler till they flopped at the joint took back the full/part sections and knocked them apart ground all the screws and nails off power washed them all and re laided on to fresh 100 mm x 50mm joists also I should say a lot off the boards were not fit for re use and the mesh was rusty/blocked holes so we renewed the mesh, but even with my labour it has been a massive saving, not sure on figures but farmer is very happy

 

[Wilksy]

 

[glasshouse]

I've been helping a farmer with just such a job going this morning to concrete a ramp, is been a hard job as was said, lifted the sections with a telehandler till they flopped at the joint took back the full/part sections and knocked them apart ground all the screws and nails off power washed them all and re laided on to fresh 100 mm x 50mm joists also I should say a lot off the boards were not fit for re use and the mesh was rusty/blocked holes so we renewed the mesh, but even with my labour it has been a massive saving, not sure on figures but farmer is very happy

Where?

 

[Wilksy]

Where?

East Yorkshire