Liftomatic on new Holland

[MF-ANDY]

Have one where the plastic lever won't stay in so machine is always lifting out of work. Guessing something is worn but how do I get to it.

 

[Sausage]

Can you open the door to get in the back? Otherwise your more experienced than I, but looks like whole panel out job.

 

[Bury the Trash]

Ah yes the old click clack , Cable adjustment or new cable ? long time since i had one mind.
Having said that here you are its all on here somewhere..

NH TLa Lift-o-matic

Evening, Got bit of an issue with the lift-o-matic on our TL70a. The "half" moon dial you push in and click to hold, no longer clicks and holds! It would appear the switch on the left hand side has maybe worn or broken internally? Got as far as taking the first cover off this morning before...

thefarmingforum.co.uk

 

[carbonfibre farmer]

Still working fine after I fixed it/replaced the part

Ah yes the old click clack , Cable adjustment or new cable ? long time since i had one mind.
Having said that here you are its all on here somewhere..

NH TLa Lift-o-matic

Evening, Got bit of an issue with the lift-o-matic on our TL70a. The "half" moon dial you push in and click to hold, no longer clicks and holds! It would appear the switch on the left hand side has maybe worn or broken internally? Got as far as taking the first cover off this morning before...

thefarmingforum.co.uk

 

[MF-ANDY]

Still working fine after I fixed it/replaced the part

How did you get access to it? This one is screwed to the back of the plastic trim

 

[TomB]

How did you get access to it? This one is screwed to the back of the plastic trim

If the bigger bit won’t stay clicked in it needs a new spring. Unscrew a few screws and pull the grey cab lining towards you,