Lily lotus 770 problem

[Hollykip]

Spreading a neighbours grass field today when a length of hydraulic hose hidden in the swath wrapped round a rotor getting wrapped tight above the dish holding the tine arms on
(How it got up there I don’t know)
Got the hydraulic hose pulled out with a struggle to find the rotor is now making a taping noise and slips a little
Putting the timing wrong a little
Looks as though the rotor may have dropped a litto
Any ideas what’s gone wrong and how I correct it
Thanks

 

[Chuckie]

If you are lucky it might just have sheared the roll pin that holds the wheel on....

 

[Pistonbroke]

Probably bent or broke a roll pin that keeps the bearing s and gear up in the correct position

 

[Hollykip]

Will check but think that roll pin is ok
Think it’s further up

 

[Pistonbroke]

Bearing collapsed?

 

[Hollykip]

Probably bent or broke a roll pin that keeps the bearing s and gear up in the correct position

Where do I find that roll pin
Is it an easy repair on your own

 

[Pistonbroke]

Haven't done one but read about it in here somewhere when someone wanted to drop the rotor and there's one rollpin keeping it up

 

[Pistonbroke]

Search thread "Lely Tedder problem". Sounds like yours

 

[bobk]

Where do I find that roll pin
Is it an easy repair on your own

On top of the rotor , right in the middle , sledgehammer job .

You may have bent an arm , which will make it tick

 

[glasshouse]

On top of the rotor , right in the middle , sledgehammer job .

You may have bent an arm , which will make it tick

Hope the guy is paying for repair