Looking for electrics for Horsch CO4

[Calmhill]

I would need a metering drive, control box and wiring loom for the CO4. If you have any or know where to ask, I would be grateful.

 

[Db880]

Why do you need that lot. It's a lot more involved than that on a CO4. It should be running an Agtron system. That means you need a power unit. Switch box, monitor head, motor module, tramline module and a motor plus all associated wiring. There's a lot of bits involved...

 

[Calmhill]

Maybe I've had wrong names for the units. You must be right.

 

[AF Salers]

May be easier to put an old mechanical drive accord metering unit on possibily?

 

[Alistair Nelson]

Is it land wheel drive or electric drive?

 

[Calmhill]

Mine is with an electric drive and I've been satisfied with that, but if necessary mechanical unit would work as well.

If anyone has mechanical Accord -unit to sell, would like to hear as well.

 

[Alistair Nelson]

Possibly cheapest and easiest option could well be to fit a new RDS electric drive kit then as think but I could be wrong horsch no longer use the system that is fitted to your machine and by the sound of it you need quite a few bits and pieces but a phone call to Horsch would confirm that after that an RDS kit should be fairly easy to retrofit as an alternative.

 

[Calmhill]

Thanks for an advice! Any idea of the cost of the RDS kit?

 

[Alistair Nelson]

Not sure was sensibly priced when I looked into it and it works as its the kit all the manufacturers use, but key thing is it's relatively straightforward to install

 

[clbarclay]

If mt memory serves me right the RDS Artemis Lite kit was about £1600 a couple of years ago and the full Artemis was about a grand more.

 

[Calmhill]

Still looking for the spares. Does anyone has an extra wiring loom for sale?

 

[cb387]

Wiring on our CO4 can be a nightmare. Would be much happier with landwheel driven Accord type system