Magnetic trailer lights

[Spartacus]

Anyone got them? Got a small sheep trailer that seems to not like having working lights so want something easy to remove and store. Do they stay on well when driving?

 

[Robt]

Always amazes me they dont have L and R written on them. Ive seen them on the wrong way round more than once. I use to use a set of sparex ones on ploughs. They were great. Some will add the extra security that only baler twine can offer. One of the ones i saw on wrong way had indeed used baler twine as a back up to the magnet.... So so close...

 

[Adeptandy]

Had some, lasted 1 trip, wasn't a lot left of them by the time they'd bounced along the road a few miles

 

[daveydiesel1]

Why not just wire a new set o lights to the trailer and be done with it

 

[Sharpy]

A set of cordless mag lights here. Very pleased with them, but you have to put any magnet onto a heavier bit of steel if you want them to stay put.

 

[Hilly]

I have a set with l and r wrote on them , they are fantastic well handy .

 

[Spartacus]

Why not just wire a new set o lights to the trailer and be done with it

I already have twice.

 

[daveydiesel1]

I already have twice.

Are u usin led?also are u routing the cable so it doesnt get damaged?

 

[Jerry]

Always amazes me they dont have L and R written on them. Ive seen them on the wrong way round more than once. I use to use a set of sparex ones on ploughs. They were great. Some will add the extra security that only baler twine can offer. One of the ones i saw on wrong way had indeed used baler twine as a back up to the magnet.... So so close...

connix ones are marked L and R.

very good and pleased with mine.

 

[zero]

We have some vapormatic led mag lights. Their very good and bright. We put some red tape around the right light on one set and a red zip tie around the right light wire on the other set.

 

[Cab-over Pete]

I have a Connix set, been very good. They hang on well to the back of an old 3t tipper trailer.

 

[oakleaf]

We have some vapormatic led mag lights. Their very good and bright. We put some red tape around the right light on one set and a red zip tie around the right light wire on the other set.

Should really be green on the starboard side and red on portside.

 

[Bobthebuilder]

Always amazes me they dont have L and R written on them. Ive seen them on the wrong way round more than once. I use to use a set of sparex ones on ploughs. They were great. Some will add the extra security that only baler twine can offer. One of the ones i saw on wrong way had indeed used baler twine as a back up to the magnet.... So so close...

The ones I looked at had L & R on them

 

[Spartacus]

Are u usin led?also are u routing the cable so it doesnt get damaged?

No, used a whole new board on it and changed lights once before. Will try led.

 

[daveydiesel1]

No, used a whole new board on it and changed lights once before. Will try led.

Them boards are just shite quality. Be better wirein gòod quality leds yourself

 

[nick...]

Got a pair on my amazone drill.they have never moved or fallen of.i know it’s not going fast but do road travel and they are ok
nick...

 

[Aspiring Peasants]

Just check they are compatible with your tow vehicle. Mine work fine on the tractor but won't work on the pick up (ranger)

 

[Hilly]

Towed a generator for hundreds of miles with them on right bouncy thing expected them to have fallen off but they didn’t , I’m Still going to get safety chains for theM as be a right waste if I did loose them or one