Mass Clear Out of Nuts and Bolts!! No Reasonable Offer Refused!!

I'm having a bit of a purge on stuff and have loads of nuts and bolts to clear as i'm not going to use them.

In lots, as follows:-

1- 55kg mixed M24, countersunk, cap heads, hex head and lock nuts mainly.
2- 100kg mixed M20 countersunk, cap heads and hex head bolts mainly.
3- 12kg M18 hex head bolts
4- 90kg M16 cap head bolts mainly and a few hex.
5- 23kg M14 bolts, mostly hex head and a few caps
6- 10kg mixed metric fine, mostly M12 x 1.25 and M10 x 1.25 pitch.
7- 18kg mixed M12 hex head, 170mm and 200mm long BZP.
8- 8kg mixed M12 cap heads. 200mm long black and 150mm long BZP.
9- 11kg M12 x 25 BZP hex head
10- 12kg M12 x 30 BZP hex head
11- 20kg mixed M6, M8, M10 and M12. All kinds of everything in here!!
12- 12kg M12 BZP nyloc nuts
13- 39kg mixed washers, mainly star/shake proof washers with some flats mixed in. sizes M4 to M12ish
14- 2kg M12 Shake proof washers
15- 110x M6 x 90 light duty expanding anchor bolts.

I thought i'd see if anything was any use to any one on here first. I was going to eBay them but I don't know if I've got the patience to do it!! Any reasonable offer considered on the lots listed above. I don't want to split them any further than they are already as the time to sort them would not be worthwhile.

Collection from Walsham-le-Willows, IP31 3BE is preferred but I can quote for delivery if required.

If someone is interested in all 400kg+ I'd be very interested in offers.

@carbonfibre farmer springs to mind!!

I've attached a few general pictures as I don't want to bore you all with loads of them. If anyone has any particular interest I can post the relevant ones as required.

 

[devonshire farmer]

I'm having a bit of a purge on stuff and have loads of nuts and bolts to clear as i'm not going to use them.

In lots, as follows:-

1- 55kg mixed M24, countersunk, cap heads, hex head and lock nuts mainly.
2- 100kg mixed M20 countersunk, cap heads and hex head bolts mainly.
3- 12kg M18 hex head bolts
4- 90kg M16 cap head bolts mainly and a few hex.
5- 23kg M14 bolts, mostly hex head and a few caps
6- 10kg mixed metric fine, mostly M12 x 1.25 and M10 x 1.25 pitch.
7- 18kg mixed M12 hex head, 170mm and 200mm long BZP.
8- 8kg mixed M12 cap heads. 200mm long black and 150mm long BZP.
9- 11kg M12 x 25 BZP hex head
10- 12kg M12 x 30 BZP hex head
11- 20kg mixed M6, M8, M10 and M12. All kinds of everything in here!!
12- 12kg M12 BZP nyloc nuts
13- 39kg mixed washers, mainly star/shake proof washers with some flats mixed in. sizes M4 to M12ish
14- 2kg M12 Shake proof washers
15- 110x M6 x 90 light duty expanding anchor bolts.

I thought i'd see if anything was any use to any one on here first. I was going to eBay them but I don't know if I've got the patience to do it!! Any reasonable offer considered on the lots listed above. I don't want to split them any further than they are already as the time to sort them would not be worthwhile.

Collection from Walsham-le-Willows, IP31 3BE is preferred but I can quote for delivery if required.

If someone is interested in all 400kg+ I'd be very interested in offers.

@carbonfibre farmer springs to mind!!

I've attached a few general pictures as I don't want to bore you all with loads of them. If anyone has any particular interest I can post the relevant ones as required.View attachment 844148View attachment 844149View attachment 844150View attachment 844151View attachment 844152

That's a hard one to value!

 

[carbonfibre farmer]

I'm having a bit of a purge on stuff and have loads of nuts and bolts to clear as i'm not going to use them.

In lots, as follows:-

1- 55kg mixed M24, countersunk, cap heads, hex head and lock nuts mainly.
2- 100kg mixed M20 countersunk, cap heads and hex head bolts mainly.
3- 12kg M18 hex head bolts
4- 90kg M16 cap head bolts mainly and a few hex.
5- 23kg M14 bolts, mostly hex head and a few caps
6- 10kg mixed metric fine, mostly M12 x 1.25 and M10 x 1.25 pitch.
7- 18kg mixed M12 hex head, 170mm and 200mm long BZP.
8- 8kg mixed M12 cap heads. 200mm long black and 150mm long BZP.
9- 11kg M12 x 25 BZP hex head
10- 12kg M12 x 30 BZP hex head
11- 20kg mixed M6, M8, M10 and M12. All kinds of everything in here!!
12- 12kg M12 BZP nyloc nuts
13- 39kg mixed washers, mainly star/shake proof washers with some flats mixed in. sizes M4 to M12ish
14- 2kg M12 Shake proof washers
15- 110x M6 x 90 light duty expanding anchor bolts.

I thought i'd see if anything was any use to any one on here first. I was going to eBay them but I don't know if I've got the patience to do it!! Any reasonable offer considered on the lots listed above. I don't want to split them any further than they are already as the time to sort them would not be worthwhile.

Collection from Walsham-le-Willows, IP31 3BE is preferred but I can quote for delivery if required.

If someone is interested in all 400kg+ I'd be very interested in offers.

@carbonfibre farmer springs to mind!!

I've attached a few general pictures as I don't want to bore you all with loads of them. If anyone has any particular interest I can post the relevant ones as required.View attachment 844148View attachment 844149View attachment 844150View attachment 844151View attachment 844152

 

[the-mad-welder]

That's a hard one to value!

How about 75p per kg on individual lots?
Discount for quantity!!
50p per kg for the lot.
VAT to be added.

 

[nick...]

Did you buy em as a job lot.
Nick...

 

[Speedstar]

I'm having a bit of a purge on stuff and have loads of nuts and bolts to clear as i'm not going to use them.

In lots, as follows:-

1- 55kg mixed M24, countersunk, cap heads, hex head and lock nuts mainly.
2- 100kg mixed M20 countersunk, cap heads and hex head bolts mainly.
3- 12kg M18 hex head bolts
4- 90kg M16 cap head bolts mainly and a few hex.
5- 23kg M14 bolts, mostly hex head and a few caps
6- 10kg mixed metric fine, mostly M12 x 1.25 and M10 x 1.25 pitch.
7- 18kg mixed M12 hex head, 170mm and 200mm long BZP.
8- 8kg mixed M12 cap heads. 200mm long black and 150mm long BZP.
9- 11kg M12 x 25 BZP hex head
10- 12kg M12 x 30 BZP hex head
11- 20kg mixed M6, M8, M10 and M12. All kinds of everything in here!!
12- 12kg M12 BZP nyloc nuts
13- 39kg mixed washers, mainly star/shake proof washers with some flats mixed in. sizes M4 to M12ish
14- 2kg M12 Shake proof washers
15- 110x M6 x 90 light duty expanding anchor bolts.

I thought i'd see if anything was any use to any one on here first. I was going to eBay them but I don't know if I've got the patience to do it!! Any reasonable offer considered on the lots listed above. I don't want to split them any further than they are already as the time to sort them would not be worthwhile.

Collection from Walsham-le-Willows, IP31 3BE is preferred but I can quote for delivery if required.

If someone is interested in all 400kg+ I'd be very interested in offers.

@carbonfibre farmer springs to mind!!

I've attached a few general pictures as I don't want to bore you all with loads of them. If anyone has any particular interest I can post the relevant ones as required.View attachment 844148View attachment 844149View attachment 844150View attachment 844151View attachment 844152

I give you a £150 for the lot if you put them in a wooden crate for shipping

 

[the-mad-welder]

Did you buy em as a job lot.
Nick...

Its the remnants of a couple of job lots along with anything else I'm never going to use.
Mixed in with the job lots was plenty of stuff that I have used or have uses for. Had to buy everything at the time as could not pick and choose.

 

[carbonfibre farmer]

I'm having a bit of a purge on stuff and have loads of nuts and bolts to clear as i'm not going to use them.

In lots, as follows:-

1- 55kg mixed M24, countersunk, cap heads, hex head and lock nuts mainly.
2- 100kg mixed M20 countersunk, cap heads and hex head bolts mainly.
3- 12kg M18 hex head bolts
4- 90kg M16 cap head bolts mainly and a few hex.
5- 23kg M14 bolts, mostly hex head and a few caps
6- 10kg mixed metric fine, mostly M12 x 1.25 and M10 x 1.25 pitch.
7- 18kg mixed M12 hex head, 170mm and 200mm long BZP.
8- 8kg mixed M12 cap heads. 200mm long black and 150mm long BZP.
9- 11kg M12 x 25 BZP hex head
10- 12kg M12 x 30 BZP hex head
11- 20kg mixed M6, M8, M10 and M12. All kinds of everything in here!!
12- 12kg M12 BZP nyloc nuts
13- 39kg mixed washers, mainly star/shake proof washers with some flats mixed in. sizes M4 to M12ish
14- 2kg M12 Shake proof washers
15- 110x M6 x 90 light duty expanding anchor bolts.

I thought i'd see if anything was any use to any one on here first. I was going to eBay them but I don't know if I've got the patience to do it!! Any reasonable offer considered on the lots listed above. I don't want to split them any further than they are already as the time to sort them would not be worthwhile.

Collection from Walsham-le-Willows, IP31 3BE is preferred but I can quote for delivery if required.

If someone is interested in all 400kg+ I'd be very interested in offers.

@carbonfibre farmer springs to mind!!

I've attached a few general pictures as I don't want to bore you all with loads of them. If anyone has any particular interest I can post the relevant ones as required.View attachment 844148View attachment 844149View attachment 844150View attachment 844151View attachment 844152

I haven't been for a visit in a while.....you do know how to tempt me

Have to (somehow) get drilling done a come over for a root through your offcuts pile.

 

[Dave W]

If they were all whitworth with mixed up rusty nuts I'd be on it like shot!!

 

[rob h]

I darent show this to my brother .he can’t go to York machinery sales without buying buckets of bolts

 

[the-mad-welder]

I darent show this to my brother .he can’t go to York machinery sales without buying buckets of bolts

Ideal Christmas present for him then!!

 

[rob h]

I don’t mind but the workshops full and we’ve now started a overflow in another building.it is handy having plenty of stock

 

[Dave W]

@Grassman

 

[the-mad-welder]

Now sold, thanks for all the interest.

 

[Gerbert]

Did you sell it to speedstar

 

[the-mad-welder]

Did you sell it to speedstar

It would be unprofessional of me to say who bought what. It's up to the buyer to say, not for the seller to tell.

 

[Gerbert]

I just ment it as a joke, I thought his offer was taking the pee somewhat.

 

[the-mad-welder]

I just ment it as a joke, I thought his offer was taking the pee somewhat.

I did ask for offers!! Anyone was free to make one and I'm grateful to anybody that did. Go in low, no harm in asking, you can always go up! I've bought several things in the past on lowball offers that I thought would be declined.

 

[Gerbert]

Fair enough, if the seller is happy eh.