Massey 3080 clutch issue

[Barry7529]

Started tractor this morning, but couldn't engage any of the gears. Noticed that the clutch pedal had gone really light. Think it maybe an issue with the valve that the clutch pedal is linked to. Spool valves 3pt linkage power steering etc all working. Would I be right in saying that the valve has failed or is there something else that I need to check before replacing it

 

[Henarar]

may need bleeding

 

[norse]

Clutch needs bleeding,on the right side if the gearbox behind the step there is a flat face fitting that may have a rubber cap on it,push the centre of this in with a screwdriver etc whilst the engine is running and it will expel the air bubbles from it,once the oil runs bubble free you are good to go,the air ingress is caused by the cylinder seals getting lazy and will be worse in cold weather

 

[Barry7529]

Clutch needs bleeding,on the right side if the gearbox behind the step there is a flat face fitting that may have a rubber cap on it,push the centre of this in with a screwdriver etc whilst the engine is running and it will expel the air bubbles from it,once the oil runs bubble free you are good to go,the air ingress is caused by the cylinder seals getting lazy and will be worse in cold weather

Just got round to trying that. Problem sorted. Thank you so much for your help