massey 64/74 series worklight pad

[bill and bens dad]

hi has anyone found how to use (energise) the spare switch on the cab pillar ? does it need a relay or a fuse? any ideas please?

 

[seedman stains]

I put some lights on the indicator brackets and had to get a relay ,look in the book for the position probably has a blank on it

 

[tr250]

@Farma Parma

 

[ih1455xl]

I added the lights to the steps on my 7480 just added a relay in the fuse box

 

[Farma Parma]

@Farma Parma

Ive never found out how you make use of that spare button neither.
Only ever used on the 8400 series that had the 4 worklights at the front of the grill

 

[bill and bens dad]

thanks for all your ideas,my tractor already has hand rail and step lights,but has a spare plug in the handrail,can not see where the relay goes !does not look to be a spare place

 

[Farma Parma]

thanks for all your ideas,my tractor already has hand rail and step lights,but has a spare plug in the handrail,can not see where the relay goes !does not look to be a spare place

That spare plug in the hand rail is just on same circuit as the handrail worklights are on. Plug a light in & you will see

 

[Bullring]

That spare plug in the hand rail is just on same circuit as the handrail worklights are on. Plug a light in & you will see

That’s correct, whether it’s for worklights or a set of headlights for when you have something on the front linkage.

On another subject do the buttons give up, I’ve put a set of led worklights on the rear and handrail and they worked fine but now I push the button they flick on for a second then go off, if you press the button about 30 times you might get them to stay on, didn’t know if it was the pad that was knackered or not enough draw to make them work, seems strange as they worked when I first fit them. The top led ones front and back work fine so I’m guessing it’s the button on the pad, new control pad sounds expensive.

 

[Farmer_Joe]

just relay, i fitted relay and it made step lights work a treat.

 

[Farma Parma]

Best thing everyone can do is bin all them Hella oval Halogen Worklights & fit quality LED units.

 

[Tarw Coch]

Best thing everyone can do is bin all them Hella oval Halogen Worklights & fit quality LED units.

Once upon a time, not so long ago, those Hella Halogens were considered quality.
Must admit I’m thinking about changing mine now I’ve got a tractor with LED’s.

 

[Farma Parma]

Once upon a time, not so long ago, those Hella Halogens were considered quality.
Must admit I’m thinking about changing mine now I’ve got a tractor with LED’s.

Yeas they poss were until the LED came along

 

[weed]

 

[weed]

 

[weed]

 

[weed]

Iv put a set of LED lights on the hand rails and plugged in it spare plug works of same switch a treat

 

[bill and bens dad]

thanks gents for your ideas/help .im looking to fit Guardian high power WL63 50 W cob led 4000 lumen worklights,crumbs they are bright ! makes the standard lights look yellow !! i want to put them on a separate switch as will not want the rear ones (which work off same switch on when im snowploughing etc)