Massey error codes

[Farmer Dan 2016]

Hi all

Have a Massey 6490 50 km dyna 6 that was parked up for a few years.

Were a number of things wrong to do with solenoids and got them sorted.

Tractor was working fine then took it for a spin it was going up a hill and suddenly I had no drive in the transmission

Have power steering and hydraulics so not the damper plate.

It is putting up error codes t1.14 and t2.14 I have lost a lot of the dash readings as well, the rev counter for example isn’t working

Any ideas

I would appreciate any advice

Dan

 

[Farmer Dan 2016]

Hi there

Any of the Massey guru’s out there able to point me in the right direction

One guy thinks it might be a speed sensor?

Dan

 

[Speedstar]

Hi there

Any of the Massey guru’s out there able to point me in the right direction

One guy thinks it might be a speed sensor?

Dan

Yes a speed sensor can be that problem

 

[Farmer_Joe]

thers some big multi plugs between cam and engine, could check them for issues if its not speed sensor but be caeful not to damage pins.

 

[JamesC]

Both those error codes refer to speed sensor.

T114 X481 - Engine speed sensor No value and actual forward travel speed > 0 km/h (0 mile/h)

 

[dannewhouse]

Did you cure the problem, mines done it today. Where is the speed sensor?