Massey Fergusson cera 72 series hyd oil cooler

[Surgery]

Anyone know where a few parts might be laying around , have tried burdens , jmt and manners , thanks

 

[Mr Happy]

Anyone know where a few parts might be laying around , have tried burdens , jmt and manners , thanks

Can you install an after market one from a local hydraulic company?

 

[Surgery]

Would have to wait too long and then it’s making sure it’s the same core , didn’t know if someone knew of a dealer who’s lost the dealership who might have one , tried nearly all the usual breakers.

 

[snipe]

There was a man called David pantry who broke combines near Doncaster, do know if he is still going. @masseybreaker might know some where.

 

[Surgery]

There was a man called David pantry who broke combines near Doncaster, do know if he is still going. @masseybreaker might know some where.

Tried him too!!
Think the old gal might have to go after this year.

 

[masseybreaker]

dave pantry 07831317003

 

[Wombat]

Didn't AdeptAndy have an issue with the oil cooler and found it had been plumbed wrong or something?

 

[Adeptandy]

Didn't AdeptAndy have an issue with the oil cooler and found it had been plumbed wrong or something?

Well remembered, twas a right git last year, hopefully sorted this year with the wiring now correct and splashed the cash on a new Oil Cooler, not an MF one I hasten to add ( £3500 ), but managed to find someone to put a new core in the one that split ( £1300 ). 90 acres in and all's good with that part of the combine

 

[Adeptandy]

Be careful with pe owned ones, I picked up 1 from Manners and it was the right size but the core had smaller air flow holes, didn't get time to see if that would be an issue, it had a small hole in it, came off a MF 30 series, so had a bit of age to it. Credit to them, sent a pic and got a full refund

 

[Surgery]

Well remembered, twas a right git last year, hopefully sorted this year with the wiring now correct and splashed the cash on a new Oil Cooler, not an MF one I hasten to add ( £3500 ), but managed to find someone to put a new core in the one that split ( £1300 ). 90 acres in and all's good with that part of the combine

Quoted 2k for a new one , got it off tonight and might see if we can get it pressure tested as it seems as it might be leaking on a weld on the edge rather than the core

 

[Adeptandy]

Quoted 2k for a new one , got it off tonight and might see if we can get it pressure tested as it seems as it might be leaking on a weld on the edge rather than the core

Have you had the hydraulic valve changed just behind the grain tank ?

Mine started with end tank seam, then the other end went first day after repair, then after the next repair the core blew a hole. 8 days lost and 100 litres of Hydraulic oil sucked through the Engine radiator and Intercooler. a year later, still trying to get the combine clean

 

[Lazy Sod]

George Coles, Shaftesbury, Dorset.