MF 2640 4wd transmission/clutch issues

[Kaliber]

Hi all, I have a MF 2640 4wd tractor. It will barely move and sometimes not at all. The tractor runs great, loader and all hydraulics seem to work fine. I am trying to get any ideas before have to split it, which I'm not looking forward to. Thanks for any help.

 

[76masseyman]

Ours were pretty good at spitting out the crank end seal and allowing engine oil to contaminate the clutch. Long time ago now, but I don’t think splitting it was too much of a job, I think the MF fitters were pretty used to it.
Yours may be a tad longer to do if it has a loader fitted.

 

[Farmer_Joe]

splitting is it not to bad, i split and removed a t/a box from a 2620 and re assembled, managed to do it all on my own, just get a decent trolley jack to pull the front fowrad on.

Mine was 2wd but it should not be to much more work on 4wd.