MF 80 loader for MF265

[Lincs Lass]

It doesn't seem to have done much, paint is still on inside of bucket

Unfortunately no stands, hopefully come across a set

They usually got took of and put somewhere safe ,as you do ,then when the loader was sold the stands had vanished ,never took ours of as it was off for long periods

 

[wdah/him]

picture of ours, i think yours looks like a short beam but hard to see until it is fitted

 

[Tha Ulsterscot]

Mine seems to be a long beam, but will soon find out mas I hope to try fitting it before the end of the week.

 

[MOG]

Not sure if it helps. Pics of brackets on my old 575 for the 80 loader

 

[MOG]

And found one with loader fitted

 

[MOG]

As for the stands, They are simply a length of solid square bar (1"??) with a circular foot plate welded on. The bracket they slide on attached to the loader is the important bit, but would be simple to make if you had one to copy (assuming they are not there)

 

[Thomas5060]

Thanks for all the help so great everyone much appreciated brackets are nearly fitted then time to try the loader on (fingers crossed)

 

[multi power]

Not sure if it helps. Pics of brackets on my old 575 for the 80 loader

View attachment 474854

Those brackets look lower than mine, my tractor is 4 WD if that makes any difference

 

[multi power]

As for the stands, They are simply a length of solid square bar (1"??) with a circular foot plate welded on. The bracket they slide on attached to the loader is the important bit, but would be simple to make if you had one to copy (assuming they are not there)

I made my own, bit crude but do the job

 

[two-cylinder]

They usually got took of and put somewhere safe ,as you do ,then when the loader was sold the stands had vanished ,never took ours of as it was off for long periods

I take our stands off, because when left on they rattle at speed on roadwork.

 

[Lincs Lass]

I take our stands off, because when left on they rattle at speed on roadwork.

I knotted two pieces of big intube together and looped it over the legs ,that stoped them wagling about

 

[two-cylinder]

Those brackets look lower than mine, my tractor is 4 WD if that makes any difference

Yes 4wd are higher

 

[two-cylinder]

Our 265 with long-beam 80.

 

[Thomas5060]

Search is on for a loader this one doesn't fit

 

[SMID]

What the problem@Thomas5060 ?

 

[Thomas5060]

What the problem@Thomas5060 ?

The loader is too short, the mounting studs are 8inches too close together and then if we modify them to fit, the ram for the bucket will catch the bonnet. Will phone in morning for long bean loader

 

[SMID]

Pity, hope its as good as that one

 

[Tha Ulsterscot]

The loader is too short, the mounting studs are 8inches too close together and then if we modify them to fit, the ram for the bucket will catch the bonnet. Will phone in morning for long bean loader

https://www.donedeal.co.uk/otherfarmmachinery-for-sale/mf-80-power-loader/14649210
This looks like a long reach.

 

[mar]

Search is on for a loader this one doesn't fit

Would it fit a 168, I might be interested if it's for sale

 

[Thomas5060]

Pity, hope its as good as that one

So do we, it's a shame tho, the one we have only cost £180

https://www.donedeal.co.uk/otherfarmmachinery-for-sale/mf-80-power-loader/14649210
This looks like a long reach.

That looks like the sort we need, goin to try Burton in the morning

Would it fit a 168, I might be interested if it's for sale

Wouldn't fit sorry