Mig welder part

[bravheart]

Broke this bit on my mig no idea what it's called or where to source a replacement.
Welder is a Murex 245 and it's the gas connector and will let gas through when the trigger is pulled.

 

[tomlad]

Solenoid ?

 

[Zebbedee]

Gas solenoid valve I would call it a few google searches should find it, try searching the numbers on coil and valve first but should be easy enough to replace with something generic

 

[fenrat]

Mig Gas Solenoid (Various Voltage) - Weld UK

This gas solenoid is put in your Mig welder when you upgrade to an euro connection if your machine only has the gas valve in the handle. Also available in: 24v 220v

www.welduk.com

Just check specs against the one on your machine and find something similar. Or ring welding Centre Wisbech and he will sort you out and pop something in the post.

 

[bravheart]

Solenoid ?

Looks like it just run a google and brought up something similar, thanks.

 

[bravheart]

Thanks all that’s what I’m after, metal tails as well?

 

[Tomr10]

Broke this bit on my mig no idea what it's called or where to source a replacement.
Welder is a Murex 245 and it's the gas connector and will let gas through when the trigger is pulled.

Looks like brand and part number are on it

 

[bravheart]

Looks like brand and part number are on it

Aye not tried the numbers yet but not made murex for a long time(afaik)

 

[tomlad]

I didn't know theyd gone

 

[Tomr10]

[/QUOTE]
No Concordia they are a valve manufacture

 

[tinman]

I didn't know theyd gone

Murex dissolved about 6 or 7 yrs ago now, but i think you can get murex electrodes still, the welders are gone anyways, Esab swallowed them up i think.
Esab has a lot of brands.., bottom of ther page.

https://www.murexwelding.co.uk/gb/en/products/brands/murex/index.cfm