Milwaukee grease gun coupler

[Niteforce]

Got a Milwaukee battery grease gun and can't seem to find out the correct size coupler for it. Any body got one and know what thread size fits .

 

[ACEngineering]

I'll bet its M10 x 1mm thread that's what my Alemite cordless is.

I buy mine off Allube.

 

[massey765]

Most are 1/8" bsp
Some are tapered
don't know if that's true for Millwalkee

 

[Niteforce]

Got a 1/8 BSP G Coupler yesterday and doesn't fit the Milwaukee or any of our alemite A500,s , had a fitter in the yard yesterday and he had a m10x1 die and that didn't seem to match up ????????

 

[Countryboy]

Just a guess but I think Milwaukee gear is American so could be UNF or less likely UNC. Any half decent engineering place should have thread gauge to check and be able to thread something to fit.

 

[ACEngineering]

Just a guess but I think Milwaukee gear is American so could be UNF or less likely UNC. Any half decent engineering place should have thread gauge to check and be able to thread something to fit.

I know were your coming from with the unf but my Alemite is American and that's definatly M10x1mm (Metric fine)

http://www.allube.co.uk/pdf/alemite-greasenipples.pdf

see if this link works? go to page 7 identifying thread sizes. Allube are very helpful on the phone so you could always call and ask them.