mini digger post driver

[buttercup]

Any one used one - will the put gate posts in....

 

[Guiggs]

Never used one but I just push the posts in with the bucket and use an 18 inch auger on the digger for gate posts.

 

[Agriimark]

only used one on a 6 tonne machine, depends on machine size, post size and ground it's going in to id say

 

[Pan mixer]

My 3 and a half tonner couldn't manage to bash in a strainer.

 

[wr.]

This will knock a 10" gatepost into decent soil.

 

[Bury the Trash]

Any one used one - will the put gate posts in....

do you mean a post driving cup on a breaker unit or an actual proper weight knocker like wr has shown? especially if it has the controls outside on the knocker like that one has.

cup driving is a poor job ime in comparison and wont put in gate posts or any post very straight infact night mare unless real soft wetty ground .

and a proper knocker on a digger will be as good as the knocker itself as above, could use a spike as well if it had one.

 

[buttercup]

Thanks for the reply looking at both a post driving cup or vibration type. In the past have just dug a big hole for digger, put post in and the put a smaller bucket on and then packed in with it as fill. ?But the someone suggest using one was quicker....