Mini super singles

[manfromhill]

Looking to replace super singles on an axle for a new project so questions
Roughly how much lower are they
Do they travel in the fields ok even if they are a road type pattern
Roughly how much for part worn on rims

 

[nick...]

Smaller the wheels, will allways take more pulling on soft ground
Nick...

 

[manfromhill]

Will be mostly road work need lower height for stability

 

[rusty]

I have some on my JF diet feeder, think they are 445/19.5. I have not managed to find any part worn/fully worn and ended up buying a new replacement for around £200 from memory.

 

[Tarw Coch]

IIRC they lower the deck height on a bale trailer by about 6 inches but that trailer would need to be built with them in mind, simply replacing super singles on an existing trailer will only gain half that with a bigger gap between trailer and tyre.

 

[manfromhill]

IIRC they lower the deck height on a bale trailer by about 6 inches but that trailer would need to be built with them in mind, simply replacing super singles on an existing trailer will only gain half that with a bigger gap between trailer and tyre.

Yep the plan would be to build it round it

 

[Massey Holland]

I have a trailer on 445 19.5's and the bed height is 42".

 

[blackbob]

Also 445 x 19.5's:

Runs lovely on the field or road, on steel springs, very stable, with max 14 fat cattle.
A good bit lower than normal 385/22.5's.
I had never seen wheels with this stud pattern, very close together?

 

[Cab-over Pete]

I have them on my low loader.

They run a treat on the road but I don't use them in the field much.

Moretons (Farmers Tyre) sell them as "take offs" or recut.

 

[Tarw Coch]

Also 445 x 19.5's:
View attachment 266780

Runs lovely on the field or road, on steel springs, very stable, with max 14 fat cattle.
A good bit lower than normal 385/22.5's.
I had never seen wheels with this stud pattern, very close together?

Is that on 10 stud? My BVL feeder is on those tyres on a 10 stud with studs very close together.
I also have a stock trailer on those tyres but that's on 8 stud, looks more like a conventional stud spacing.

 

[blackbob]

Is that on 10 stud? My BVL feeder is on those tyres on a 10 stud with studs very close together.
I also have a stock trailer on those tyres but that's on 8 stud, looks more like a conventional stud spacing.

I've never actually bothered counting them, but yes at a guess, 10 studs.
Stewarts started by using secondhand commercial trailers and axles but this would certainly be new (2 years ago).