mxm190 problem

[ozcountry]

Hi.... i have an mxm190 that wont drive above 6th gear.... it seemed to half engage 7th but thats it.... feels like a slipping clutch (in the trans) so i finished the job in 6th or lower and it pulled fine...... any ideas ?

 

[Mursal]

................................

 

[Richard Devon]

................................

wrong range thats for Magnums

 

[Mursal]

Good point .................

 

[Kevtherev]

Synchro or clutch pack gone

 

[ridger]

Try calibrating first anyway

 

[Graham Grant]

Try calibrating but sounds like medium range clutch slipping

 

[cosmagedon]

Will it not let you select any other gear and drive? You should be able to select up to 12th and pull away.

When you say it was slipping, did it ever stop and flash up an error? When they slip after a few seconds it will lose drive to protect the pack.

What error codes have you got up? Have you got a H button to go in and read the errors?

 

[Thick Farmer]

Swan Vestas.

 

[ozcountry]

Thanks for the replys and Sorry for the slow response .... i get an error code flashing on the screen then i have to turn the engine of and restart to be able to select any gear..... i haven't tried taking of in 12th it normally wont anyway as it weighs 16ton plus tyre water (set up as forest mulcher)..... will try on monday and see what happens

 

[cosmagedon]

If you get me the error code I will look it up for you. Try and start off in any other gears to see if they slip, note down every gear it slips in and we can work out what pack has the problem.

 

[farm Colombia]

I have A MXM 190 slipping from 7th up to 12th works find from 1 to 6 and reverse gears are all working find any Idea what the problem could be

 

[cosmagedon]

Mid range clutch pack, solenoid or wiring.

Try to calibrate it and see what it shows.