New Holland t6050 beacons

[Scott 6050]

I’ve read through some posts on here about the switch failing on these tractors if you run two beacons off them. The solutions is to wire in a relay, could anyone shed any light on what sort of relay to wire in?

 

[Spanner_Man]

Correct part not expensive from your dealer. Plug in and play

 

[del_boy]

Swap them for led beacons. Done this on my tsa as it wouldn't run 2 normal ones. Now runs 2 led ones no bother

 

[Farmer_Joe]

Get led got a pair off eBay mighty impressed with them

 

[Ptk44]

I’ve read through some posts on here about the switch failing on these tractors if you run two beacons off them. The solutions is to wire in a relay, could anyone shed any light on what sort of relay to wire in?

Correct part not expensive from your dealer. Plug in and play

I bought one from this seller. As it happened the one I bought came with two relays.
https://www.ebay.co.uk/itm/New-Holl...-/193709371063?_trksid=p2349624.m46890.l49292

 

[Scott 6050]

Thanks, is that a plug in and go job then?

 

[Ptk44]

Thanks, is that a plug in and go job then?

Yes. Though I have not had time to fit it yet.

 

[Scott 6050]

Ok, thanks for your help, with regards to my other post is it likely I’ll have issues running two beacons off the other two tractors similar to this issue?

 

[Ptk44]

Unfortunately that I dont know. It depends on the wiring set up and whether relays are used or not amd their ratings. I have not seen them ripped.
Others on here might have direct experience hopefully of those modes

 

[Scott 6050]

Ok thanks for your help