New Holland T7 front hub grease points?

[ColinV6]

Just a quick one, greasing up the tractor this morning and can’t find a grease point for the top of the hub at the right hand side?

On the left it’s where you would expect. Am I missing something completely obvious??

 

[nelson]

its because there's an angle censor in there and over greasing damage it so nh removed it

 

[michael N123]

My old valmet has grease points there but my new Valtra doesn’t

likely don’t need them with this newer tackle

 

[MrNoo]

Yes, perfectly normal!!! My T6 is the same

 

[ColinV6]

Thanks all. Good to know I wasn’t going crazy! Must have spent 20 minutes looking for the damn thing!

 

[stevedave]

There is (as has already been mentioned) an angle sensor. On the TMs greasing it used to bugger up the sensor so NH removed it.

 

[ColinV6]

There is (as has already been mentioned) an angle sensor. On the TMs greasing it used to bugger up the sensor so NH removed it.

Seems odd that they’ve left one side there but not the other.

 

[NHMatt]

Seems odd that they’ve left one side there but not the other.

The right hand side has a phosphor bronze type material instead of grease- grease is likely better though.

 

[devonboy]

Doing you annual grease around then.top marks.

 

[DrDunc]

Fairly sure the grease is supposed to be into the nipple, not smeared around it? ??

 

[Chae1]

Fairly sure the grease is supposed to be into the nipple, not smeared around it? ??

Do you never get a bit of leakage when you pull out?

 

[ColinV6]

Fairly sure the grease is supposed to be into the nipple, not smeared around it? ??

Gives added effect

 

[Cowabunga]

Doing you annual grease around then.top marks.

I see what you did there. ?

 

[devonboy]