will_mck
Member
I've a tx 32 here and the operators manual says to set the return spread plate at 300mm from the frame of the combine, I'm confused though is it 300mm from the left hand side of the combine or 300mm from the right hand side of the combine. The spread plate is located where the returns auger throws the grain back out onto the grain pan. I think they mean from the left hand side, my combine does start putting out grain from the left side first if you push on too hard. Also does anyone know what engine rpm a tx 32 should rev flat out at?When I bought the combine the previous owner had screwed it out to rev harder which I didn't know causing the rubbers that hold the shakershoe to come loose so I had to adjust it back a bit, don't know what the factory setting was though.
